L-590AX Mark II, as the name suggests, is the second generation of L-590AX, 30W(8Ω), Chassis design, internal partition layout, and even tone control, two sets of speaker outputs, rear terminal arrangement, speaker sockets, and phono amplifier functions, etc., are exactly the same as the previous model. The power supply part is taken from the M-700u rear stage 640VA EI transformer, which is located in the center of the fuselage, eight 10,000 piecesμThe F capacitor is exactly twice as large as the previous generation, and the energy reserve is very abundant. Although the output power is the same as the previous generation 30W x2(8Ω), 60W x2(4Ω), But the damping coefficient is increased from 240 to 320, which means that the control is better than before.
L-590AX Mark II will give you the toughness you deserve; when the tension of the music is displayed, it will also make people listen to the blood, but in any case, it will not make people listen nervous.
The 590AX came to the second generation. It can no longer be regarded as the usual Class A amplifier. It has both the sound of Class A and the speed of Class AB. It can be used for both movement and static. Although the design routine is gradual, the sound performance is leap forward!
L-590AX Mark II
Continuous output power: 30W+30W (8Ω), 60W+60W (4Ω)
Input terminal: PHONO (MM): 2.5mV / 47kΩ,
PHONO (MC): 0.3mV / 100Ω,
PHONO (MC): 0.3mV / 100Ω,
LINE: 180mV / 47kΩ,
BAL.LINE: 180mV / 55kΩ,
MAIN-IN: 550mV / 47kΩ
Frequency response: PHONO: 20Hz~20kHz (±0.5dB),
LINE: 20Hz~100kHz (+0, -3.0dB)
Total harmonic distortion: less than 0.005% (8Ω, 1kHz), 0.02% or less (8Ω, 20Hz~20kHz)
Signal to noise ratio: HONO (MM): 91dB or more,
PHONO (MC): 75dB or more,
LINE: 107dB or more
Weight: 28.4kg (main body), 36.0kg (standard bag)
Volume: 440× 193× 463 mm (W x H x D)
.......