Instructions for use:
●Before using for the first time, please check whether the non-stick coating inside the bakeware is cut or damaged.
●Before each use, please wash the inside first and wipe it dry with a soft cloth before use.
●After each baking, please use a soft cloth or soft plastic scraper to remove the residue in the appliance.
●Every period of use, it is best to add a small amount of neutral detergent with warm water, and wash the residue thoroughly with a soft cloth.
●Sanneng general non-stick molds are suitable for baking bread products(Sugar content below 11%).
Maintenance instructions
●After washing with water or warm water, wipe or dry it(Must be stored dry).
●Regularly check the wear condition of the product surface, find the cause of abnormal wear in time and make corresponding adjustments to avoid more serious damage to the non-stick coating, thereby prolonging the service life of the product.
Precautions
※Do not use a knife to cut directly, so as not to damage the non-stick coating.
※Do not use sharp metal products, scouring pads and chemical cleaners to wipe.
※Do not leave baked or unbaked products in the appliance, because the corrosion products formed by the moisture, sugar and starch accumulated in the product will corrode or oxidize the metal material at the bottom of the non-stick coating, thereby affecting The non-stick effect and service life of the coating.
※Try to avoid collision and friction caused by careless operation, causing wear or scratches of the non-stick coating.
※When storing, please handle with care, do not store or even accumulate in damp places, keep the appliance dry.
※When using, it should be taken up and down to avoid abrasion or scratches of the non-stick coating.
※Operating for a long time under the disparity of high and low temperature, the non-stick coating will produce tiny cracks, causing residual substances to corrode the non-stick coating, and the non-stick coating will eventually lose its non-stick performance. To avoid this from happening,we suggest:
●If the baking temperature is lower than 250℃, the service life can be extended;
●Avoid uneven heating;
●Do not burn empty;
●Do not use high-temperature steam for cooking or cleaning, otherwise the non-stick coating will peel off easily;
●Do not use salad oil.
Note:The newly purchased three-energy bakeware may be slightly deformed within 30 to 90 days of initial use. This is a normal phenomenon of metal expansion and contraction. It is not a product quality problem. It can return to normal after a period of use.