Camera module
Model:KS302HB
product description
KC302HBCamera module,Using fine sizeCMOSThe sensor is designed to ensure high-quality images; the product can be used in tablet computers,Handheld, high-speed camera, detector…The finished product camera module has the characteristics of small size, intelligent focus, accurate color reproduction, clear image, low power consumption, and high reliability.…
1. Real shots
2. Specifications and characteristics
Total size:30mm*25mm±0.2mm
Imaging size:160*120,176*144,320*240,352*288,640*480
IRAnti-infrared interference filter(IR Filter)
Three, performance and parameters
Item | index | Remark |
Optical structure | Half glass, full glass | |
Field of view | 65° | Angle optional |
Aperture | F2.8 | |
Relative contrast | 60% | |
Image transfer rate | 15/30 fps | |
Output signal | YUV | |
Interface | USB2.0 |
|
Color compression format | YUY2 | |
Working voltage | 3.3V~5V | |
Distortion | ?0.5% | |
Wire | 1.5M(Optional) | |
1, Rate 1~30fps/s
2, Using high-quality lenses
3,high speedUSB2.0Interface, fully compatibleUSB1.1
4, Plug and play, no driver required
5, Photosensitive device:High quality 1\\4inch
6, Letter-to-noise ratio: greater than48dB
7, Focusing method: manual focus
8, Scan mode: progressive scan
9,VideoData format:8/16bit
10, Working temperature: -20°-60°
11, Image processing: exposure control/Gain control/White balance/Gamma correction
12, Fast compression engine,2To8Compression ratio
13,MMXTechnology high-speed soft decompression, the highest resolution can reach 1280*960dpi
14, Support systemWindows\\XP\\win7
15, Support dynamic and static image capture, supportvideoVideo recording
16, High quality64Bit true color, applicable shooting range:10cmTo100cm
17, Video conference, video chat, video phone, file shooting
18, Color compression technology:YUY2\\MJPEG
19, Size:30mm*25mm(Template)
Four, test data
Optical test
All tests are carried out in a dust-free environment;
Test board brightness: the brightness is400~500LUX, The brightness difference between the center and the four corners shall not exceed15%.
Resolution test
Item | Content |
Test chart | MTFTest chart |
Condition(Effective distance:10cm~∞) | Light source: cold light source Color temperature:6500K brightness450±50LUX |
MTFSpecification | center/Four weeks:40 |
Vignetting test
Item | Content |
Test chart | Test chart(See the picture below) |
condition | Light source: cold light source Color temperature:6500K Test height:400mm |
Specification | No vignetting |
| |
KS302HBTest chart(No shadow on the corners is normal)
Stain test
condition | Specification |
The module faces the white light test board, and observe whether the screen is stained | The difference between the brightness of the swelling and the surroundings does not exceed5% |
Injury point/Dead pixel test
DEAD PIXEL(Dead pixels) | No reaction to light, it looks like either a white spot or a black spot. The brightness of the point will not change, this point is calledDEAD PLXEL. |
WOUNDED PIXEL(Injury point) | It will appear with irregular frequency due to the bright and dark light, and the dots will have different brightness due to the bright light. This point is calledWOUNDED PIXEL. |
Pixel | Total number of blocks | totalPLXEpoint | BlockPLXELpoint |
0.3 | 81 | 307200 | 3793 |
1.3 | 81 | 1336400 | 16499 |
Environment?Reliability Test Conditions(Temperature test/Vibration test/Drop testSpecification)
test | Item |
1 | Free fall test | high:150cm, Six sides; |
2 | Vibration test | 30Hz,3g,3axis,60minute/Axial |
3 | Storage test(Standard) | High and low temperature:-20°C~+70°C/Each16Hour |
4 | Humidity test(Standard) | 65°C/95%RH/72Hour |
5 | Operational test(Standard) | -20°C2Time→55℃ each2Hour |
6 | Loop test(Standard) | -20°C/4Hour→70°C/4Hours,10Second-rate |
Five, matters needing attention
1, This product isCMOSproduct,Sensitive to static electricity,Please pay attention to the influence of static electricity when using, handling and storing;
2, Please do not touch the lens aperture with bare hands, so as not to shed finger marks at the aperture and affect the image quality;
3, This product is a more precise product, and mechanical collision should be avoided during use or handling;
4, During use,Avoid shooting directly into the sun,So as not to damage the circuit;
5, At design time,Power supply to this product should use simulationLDO,Avoid using switching power supplies,likeDC\\DCConverter,The device may increase noise,Affect image quality;
6,FPCIf there is any bending during installation, it must be no less thanR0.5Corner transition to ensureFPCPerformance.
This camera module can be added with the shell shown in the figure below, and an additional 10 yuan is required.
Tiger cameraProfessional research and development of various camera modules, face recognition function, auto focus function, QR code recognition, barcode reading, all-in-one camera, advertising machine camera, ATM surveillance camera, etc. Welcome customers to inquire, we will according to your Request customization, there is always one suitable for you!
Business phone: 15817308389 Mr. Liu
,