Kind reminder
Please take a few minutes to look at the precautions, the introduction here is very clear,Avoid unnecessary troubles caused by inappropriate purchases!
Due to packaging and printing problems, please refer to the actual wattage marked on the lamp for the power of the lamp, please don''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''t take it, thank you! !
1: Confirm whether the diameter of the headlight base is 2.0CM! The lamp holder is flat-angled with double claws, and the two claws are flat and flush! !
2: The use of alternating current is prohibited! !(You need to refuel the headlights to turn on, it’s AC)
3: The three-lamp style illuminates the beam like a flashlight, with a small condensing area, but it is definitely brighter than flashlights and bulbs. If you need better results, it is recommended to choose a double-sided LED model! !
4: Precautions for electric vehicle purchase: There are many electric vehicles that are not bright when they are installed. In this case, the vehicle may be a negative control vehicle.(The far and near lights of the negative control car are negative electrodes, only one positive electrode)Generally, the far and near lights of the car are two positive poles and one negative pole. There is no problem with this kind of car. When the negative control car does not light up, you can change the positive and negative poles, and the lights will turn on after the exchange. Can not achieve dimming(Therefore, it is best for those who use electric vehicles to check at the repairing place first, which can reduce unnecessary troubles! !)
5: Regarding the description of the far and near lights, users who refit on electric must be optimistic to avoid unnecessary disputes.
The original car''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s far and near light switch circuit must meet the national general standards; the far and near light switch control must have two positive electrodes, that is, a common negative circuit. The LED light can be installed to achieve dimming, and vice versa.![](https://img.alicdn.com/imgextra/i2/2261459949/TB23k0onXXXXXalXpXXXXXXXXXX_!!2261459949.jpg)
![](https://img.alicdn.com/imgextra/i3/2261459949/TB2qCdbnXXXXXcQXpXXXXXXXXXX_!!2261459949.gif)
![](https://img.alicdn.com/imgextra/i2/2261459949/TB2E24WnXXXXXXaXXXXXXXXXXXX_!!2261459949.jpg)
![](https://img.alicdn.com/imgextra/i3/2261459949/TB2gVhdnXXXXXcDXpXXXXXXXXXX_!!2261459949.jpg)
![](https://img.alicdn.com/imgextra/i1/2261459949/TB2Fs._mVXXXXXaXFXXXXXXXXXX_!!2261459949.jpg)
![](https://img.alicdn.com/imgextra/i4/2261459949/TB28NJxnXXXXXcIXXXXXXXXXXXX_!!2261459949.jpg)
![](https://img.alicdn.com/imgextra/i1/2261459949/TB2z7pbnXXXXXcAXpXXXXXXXXXX_!!2261459949.jpg)
![](https://img.alicdn.com/imgextra/i1/2261459949/TB2g0pKnXXXXXa7XXXXXXXXXXXX_!!2261459949.jpg)
![](https://img.alicdn.com/imgextra/i3/2261459949/TB2XrtOnXXXXXaqXXXXXXXXXXXX_!!2261459949.jpg)
![](https://img.alicdn.com/imgextra/i3/2261459949/TB2EDBznXXXXXcRXXXXXXXXXXXX_!!2261459949.jpg)
![](https://img.alicdn.com/imgextra/i4/2261459949/TB2iBpbnXXXXXcHXpXXXXXXXXXX_!!2261459949.jpg)