| flashlight(Bare metal, without charger and battery, you need to bring your own 26650 battery and 1 charger when you buy it) Flashlight + battery + charger(Including one flashlight, one 26650 battery, one charger) Recommended reason: (1): The brightest T6 long-range shot king at present, the light spot is big enough, the brightness is good enough! The distance is far enough! (2):Three power supply methods: 1 use a 18650 lithium battery to supply power,2Using a 26650 lithium battery for power supply, 3Powered by 3 AAA batteries. (3): Fine workmanship, using pure copper as conductive material【Pure copper column at the tail, pure copper circuit warehouse】, Which greatly improves the heat dissipation and electrical conductivity! (4):Telescopic focusing: head telescopic focusing, free stretch focusing astigmatism-focusing, aluminum alloy material; (5):Tail switch: high-quality natural rubber material, non-slip surface treatment, light touch switch to switch the lighting mode; (6):Cooling ring: Multi-layer heat dissipation conductive sheet, providing heat dissipation protection and more durable products. The benefits of using T6 bulbs: It is well known that the price of T6 is several times that of ordinary Q5. The reason why T6 is used is to make up for the shortcomings of ordinary CREE Q5 series flashlights. Ordinary flashlights can illuminate far because the light cup condenses all the light, but it illuminates into one spot and cannot illuminate in a large range. The T6 bulb flashlight makes up for this!
Instructions for use of strong light flashlight One. Switch instructions 1. The battery is positive facing inward(Over the lamp holder), The negative electrode faces outward(Tail). 2. The switch is at the rear, the switch function is the switch function by pressing the switch again, and the dimming function is by pressing the switch lightly. Two. Circuit board instructions 1. Our torch adopts advanced voltage-stabilized and constant-current technology, which can effectively solve the requirement of LED torch for voltage-stabilized and constant current. 2. Special tips: a. Do not use overvoltage, and the voltage should not exceed 4.2V. b. The positive root of the battery is facing forward and do not reverse, otherwise it will burn the board. c. Pay attention to the temperature change of the flashlight to ensure heat dissipation. d. Non-professionals Do not open the circuit board 3. Warranty description: Opened or processed circuit boards are no longer covered by the warranty. Three. Lithium battery instructions 1. The battery for this flashlight is mainly 26650 lithium battery. 2. Lithium battery characteristics: Lithium batteries and mobile phone batteries have completely different charging methods; lithium batteries have no memory and can be charged at any time, do not overcharge or over discharge. 3. The first charge is 6 hours at least, and then the green light will be on according to the charger. No need to overcharge. 4. The natural discharge rate of the lithium battery will release about 1% or less of its charge every day when not in use. Although it is slow, it can be prevented from being left for too long. 5. Pay attention to the waterproof, anti-period, and anti-drop of the battery. 6. Special reminder to use anti-overcharge, anti-reverse connection and anti-short circuit“Three defenses”Charger 7. If the battery is not used for a long time, it should be fully charged and stored. Normally, it should be charged and discharged again in about three months; 8. Warranty description: The warranty is no longer covered by the battery after it leaves the factory. Four. Instructions for use of torch 1. When using the torch, choose according to the voltage and battery requirements of the torch. Don''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''t use it indiscriminately to prevent the circuit board from burning. Do not use batteries of different models and voltages at the same time. 2. In use, turn off the torch when the brightness of the torch changes significantly to prevent over-discharge of the battery. 3. Heat dissipation skills: ensure heat dissipation during the use of the flashlight. When the battery is strongly required to be fully charged, it is best to use the second gear first, so that the lamp holder and battery of the torch can prolong the life of the product! Holding the torch tightly with your hand is the best way to dissipate heat; it is recommended to dissipate heat according to the heating condition of the torch when it is turned on, or turn it off, and then turn it on after the temperature drops to facilitate heat dissipation. 4. In view of the instructions of the flashlight on the waterproof, shockproof, etc., strengthen precautions. 5. Keep the inner wall of the lamp cup clean and never wipe it with your hands or hard objects; to clear the fingerprints on the lens, you can use a cotton swab and lens cleaner to gently wipe it. 6. Do not direct the light of the flashlight into people''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s eyes. It is super bright and dazzling, so as not to affect vision, especially children. 7. If you do not use the flashlight for a long time, please take out the battery(One month or longer), To avoid chemical corrosion. Five. Protection instructions 1. Do not keep the flashlight in contact with sunlight, water, chemicals and corrosive gases for a long time to avoid damaging the protective layer of the flashlight. 2. To keep“0”The ring and thread rotate smoothly. Rub petroleum jelly etc. on the surface 2-3 times a year. Six. Troubleshooting 1. Check the battery: make sure the battery is powered and install the battery in the correct direction. Do not use batteries of different brands, and do not mix old and new batteries. 2. Check the tail cover: make sure that the switch has been tightened and the contact is good, and that the copper pillar of the tail cover is in good contact with the metal sheet of the tail cover pressing ring. 3. Pay attention to whether the lamp cap is loose. Several common misunderstandings in the purchase of flashlights Misunderstanding 1: Brightness is not as high as possible The first method to increase the brightness of the flashlight is to upgrade from the lamp holder to the reflector, the battery, and the main switch design. Both international and domestic brand-name products have undergone rigorous design and testing to ensure service life and safety. The second method is to increase the voltage and current to achieve: the rear foot from the overband is very hot, because the two do not match, resulting in frequent burning of the lamp holder and frequent over-discharge of the lithium battery, which can only be lit for a few minutes and often need maintenance . Misunderstanding 2: Misled by false parameters Many sellers intentionally or unintentionally falsely mark the lumen value Misunderstanding 3: Orange peel reflective bowl may not be better than smooth The reflection efficiency of the orange peel reflector is lower than that of the smooth surface. You can find that the high-power search lights on the market basically use the smooth surface bowl, because of the high reflective efficiency and long range. So why do most tactical flashlights use orange peel reflectors? The reason is simple, in order to get a perfect spot. Because the light bulbs we generally use have filaments, the light spot reflected by the reflector happens to be a projection of the filament, and the principle is similar to the phase principle of a convex lens. In this way, the light spot is a clear filament, which is ugly. We look at the parameters but also the actual effect! The flashlights sold in this store are marked with real brightness, long battery life, pure and transparent light color, and perfect condensing effect! It is an excellent auxiliary tool for engineering work and field sports! The advantages of this flashlight: small size, light weight, easy to carry, sturdy and durable, with all-weather use function, strong light, long direct distance, strong and weak light optional, strong light—Far away, low light——Recent photo, in case of emergency——Burst flash. The titanium oxide alloy on the top is designed to strengthen the attack and one head, which can replace the safety hammer to smash the windows and escape in an emergency. 【Common problem】 Q: Do I need to charge it before using it? Answer: Please use it first. When the flashlight is dark, charge it for 4 hours before using it. Lithium batteries are most afraid of over-discharge, so please get into the habit of charging. Q: What should I do if the bulb is broken? Answer: The lamp life is 10W hours. If unfortunately it is really broken, you can contact us and exchange it at a discount. Q: What is over-discharge of lithium battery? Answer: If you continue to use the battery after the brightness is obviously weakened, the battery will be damaged even after professional activation is performed. Therefore, please pay attention to the maintenance of the battery and charge more. Precautions for the use of bright flashlights Do not disassemble the lamp head frequently to avoid damage to the reflector or bulb. Precautions for maintenance of bright flashlight When using, please carry out routine maintenance of the torch so that it can continue to provide you with high-quality services 1. Please wipe the flashlight with a clean soft cloth after each use. 2. When the flashlight is contaminated with seawater or corrosive liquid, please clean it with clean water and blow it dry with a hair dryer. 3. When the lamp cap and tail cover are not screwed smoothly, please apply a small amount of silicone grease on the interface. 4. When the flashlight is not in use, please take out the battery and store it in a cool place. |