Mytek 192-DSD-DAC
The famous American Mytek 192-DSD-DAC decoder. Support 64xDSD, 128xDSD, PCM up to 32 bits/192k. The dynamic range is as high as 128 decibels, and the total harmonic distortion is as low as -110 decibels. With headphone jack, you can directly plug in hi-fi headphones to enjoy music. The analog output rca and xlr are balanced. Digital input terminals include Firewire, USB x 2(One usb1.1 one usb2.0), Optical fiber, coaxial, AES/EBU. There are also clock input and output ports for BNC terminals.
This is a new batch of pre-level version from the factory, the firmware version is 1.7.1, with a pair of rca pre-level inputs, which can be used as an independent pre-level. The decoded analog output level can be adjusted(Including analog mode adjustment / digital mode adjustment two modes), Can go directly to the rear stage or active speakers. The colors are black and silver. Warranty for 1 year.
Package content: one DAC, one power cord(European standard plug), One gold-plated USB cable and one manual.
Simple instructions for use:
The main function operation of Mytek 192 decoder is to rely on the black round button on the left side of the panel and the Menu button next to it. After powering on, press the Menu button to enter the setting mode. At this time, turn the black round button clockwise to set the following respectively: Input selection(input), Upscaling(upsampling), Digital filter mode(filter),volume control(volume), Volume attenuation(volume trim), Fn1 key definition, Fn2 key definition, remote control(remote),show(display), Firmware version view(firmware). When you rotate to the corresponding setting, you can see blue text instructions on the display. In the setting mode, the Menu button plays“Confirm and return”Function.
Example: To set the input, for example, you need to select the coaxial input of the Mytek 192 decoder. When the input is displayed, click the black round button, and then turn the round button. Usb1, usb2, FireWire, SPDIF, AES, toslink, adat, sdif, analogue(Analog input, used as pre-stage)Wait for the input item, rotate to SPDIF(Coaxial)When you press the Menu button, this input is selected.
Upscaling(upsampling), Click the button, there will be two choices of on and off. If you need to enable the machine''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s up-conversion function, press the menu button when the screen displays on.
Digital filter mode(filter), There are two options of pcm and dsd first, click to enter pcm, there are two options of sharp and slow, the former is a steep filtering curve, the latter is a slow filtering curve. The sound is slightly different.
volume control(volume control), There are three options: analog(Analog volume control), Digital(Digital volume control), Bypass(Fixed level output).
For the specific setting menus above, see pages 10 and 11 of the manual. All the menu options of the decoder are marked. After completing the setting operation, press the Menu button to exit the setting mode.
In normal playback mode, the black round button plays the role of adjusting the volume of the earphone port. Press the black button and then turn clockwise to increase the volume of the earphone.
USB 1.1 does not need to be installed, it can be plug and play, and USB 2.0 needs to download the driver from the official website to install. Firewire input also requires a driver to be pre-installed on the computer. Official website address:www.mytekdigital.com
Warning: If you are unsure and experienced, and unfamiliar with English, please do not upgrade the firmware by yourself! If the wrong file is loaded, it will cause the machine to crash, and it must be returned to the factory for repair! The firmware that came with the machine is already very new.
1298706851