\ \\\ Notice:
The MICROMOT steel collet has been quenched, so it has high flexibility. Even in the case of frequent use, the tool can maintain consistent performance(Unhardened four-slot brass or aluminum collets are not comparable to these collets). The three-slot collet is much more difficult to manufacture than the four-slot collet, but its bearing surface is better. This is especially important for tools with a smaller shank diameter. | \![Keyless chuck](https://img.alicdn.com/imgextra/i4/2044353934/TB28JaAXVXXXXXkXpXXXXXXXXXX_!!2044353934.jpg) |
\\\ ![](https://img.alicdn.com/imgextra/i1/2044353934/TB2RxaAXVXXXXaOXpXXXXXXXXXX_!!2044353934.jpg) \MICROMOT steel collet set (standard configuration in the machine, this link is an accessory)\As mentioned above. It is suitable for all MICROMOT machines, but does not include pen-shaped engraving machine GG12 and pen-shaped sanding machine PS12. The collet set includes six steel collets 1.0-1.5 -2.0–2.4–3.0–3.2 mm and a lock nut.
NO 28 940 ![buy](https://img.alicdn.com/imgextra/i2/2044353934/TB2vG9BXVXXXXXPXpXXXXXXXXXX_!!2044353934.jpg) | \ | \ |
\\\ |
\\ | \ | \ |
\\![Flexible shaft](https://img.alicdn.com/imgextra/i3/2044353934/TB2k9WCXVXXXXaSXXXXXXXXXXXX_!!2044353934.jpg) | \\\ \\\MICROMOT flexible shaft 110/P | \\\ There are three ball bearings inside, two in the light-duty aluminum housing (hand-operated end) that has been turned, and one at the drive end to prevent vibration of the tool bit. The highly flexible shield and core can transmit power effortlessly even when severely bent, and will not get hot. Both the operating end and the driving end are equipped with springs to prevent seizure. . Length 100cm. High speed 25,000rpm. Contains 6 metal collet chucks (1.0-1.5-2.0-2.4-3.0 and 3.2mm).
NO 28 620 ![buy](https://img.alicdn.com/imgextra/i2/2044353934/TB2vG9BXVXXXXXPXpXXXXXXXXXX_!!2044353934.jpg) | |
\\ ![](https://img.alicdn.com/imgextra/i4/2044353934/TB2csyDXVXXXXaXXXXXXXXXXXXX_!!2044353934.jpg) | \\\ \\\MICROMOT flexible shaft 110/BF | \\\ The product is the same as mentioned above, but the head is equipped with a quick-change three-jaw chuck(0.3-3.2mm). Drills of different diameters can be used at any time during work. \NO 28 622 ![buy](https://img.alicdn.com/imgextra/i2/2044353934/TB2vG9BXVXXXXXPXpXXXXXXXXXX_!!2044353934.jpg) | |
\\ |
\\\Universal gripper UHZ\The ball joint structure can rotate in any direction.
Used for equipment with a neck of 20mm, such as FBS 240/E, FBS 12/EF, IBS/E, LB/E, MICROMOT 50, 50/E and 50/EF. The fixture made of die-cast zinc can be convenient and fast Clamped on the table surface with a thickness of 60mm or less. It also contains two screws, which can be fixed on any special occasions.
NO 28 610
![buy](https://img.alicdn.com/imgextra/i2/2044353934/TB2vG9BXVXXXXXPXpXXXXXXXXXX_!!2044353934.jpg) | \ | \![](https://img.alicdn.com/imgextra/i1/2044353934/TB2YnGAXVXXXXXPXpXXXXXXXXXX_!!2044353934.jpg) |
\\ |
\\\MICROMOT\Drill stand MB 140/S\120 x 220 mm machined and milled working surface with baffles and scales installed. The nose frame is made of die-cast aluminum with a throat capacity(Bar to drill shaft)It is 140 mm and the feed stroke is 30 mm. The chrome-plated feed rod is operated by the drive plate and ball bearings to form an extremely sensitive feed system. The T-shaped bar can easily adjust the height of the head frame and fix the drilling and milling machine on the 20mm bayonet. The headstock has a scale and can be tilted 90 degrees in both left and right directions°. With screw holes, the base can be fixed to the workbench. There is a bolt locking device to fix the depth. It can be used with MICRO compound table KT 70 for better milling operations.
NO 28 606
![buy](https://img.alicdn.com/imgextra/i2/2044353934/TB2vG9BXVXXXXXPXpXXXXXXXXXX_!!2044353934.jpg) | \ | \![The drill grinder bracket can become a standard bench drill through the bracket, and can replace the clamp to use a flexible shaft.](https://img.alicdn.com/imgextra/i3/2044353934/TB2pnGAXVXXXXatXpXXXXXXXXXX_!!2044353934.jpg) |
\\\ Notice:
Our technicians prefer to use aluminum parts because they are clean and stable. All the accessories and the feed mechanism are processed by the new CNC machine tool, which is extremely!
| \![](https://img.alicdn.com/imgextra/i2/2044353934/TB2ecuAXVXXXXXkXpXXXXXXXXXX_!!2044353934.gif) | \\ The drill stand holder can rotate 90 left and right°. Therefore, it can also replace the UHZ or UHV holder when the drilling and grinding machine uses a flexible shaft. |
\\
|
\\\MICROMOT Drill floor support MB 200\The head with dovetail guide can rotate 90°Operation (with scale ring indication). It is used when the workpiece is in the lateral position. \120 x 220 mm machined and milled working surface with baffles and scales installed. The nose frame is made of die-cast aluminum, with a throat capacity(Bar to drill shaft)It is 140 mm and the feed stroke is 30 mm. The chrome-plated feed rod is operated by the drive plate and ball bearings to form an extremely sensitive feed system. The T-shaped bar can easily adjust the height of the headstock and fix the drilling and milling machine on the 20mm bayonet. The headstock has a scale and can be tilted 90 degrees in both left and right directions°. With screw holes, the base can be fixed to the workbench. There is a bolt locking device to fix the depth. It can be used with MICRO compound table KT 70 for better milling operations.
NO 28 600
![buy](https://img.alicdn.com/imgextra/i2/2044353934/TB2vG9BXVXXXXXPXpXXXXXXXXXX_!!2044353934.jpg) | \ | \![The drill grinder bracket can become a standard bench drill through the bracket, and can replace the clamp to use a flexible shaft.](https://img.alicdn.com/imgextra/i1/2044353934/TB2v0SDXVXXXXXSXXXXXXXXXXXX_!!2044353934.jpg) |
\\
| \![](https://img.alicdn.com/imgextra/i2/2044353934/TB2ecuAXVXXXXXkXpXXXXXXXXXX_!!2044353934.gif) | \\ The drill stand holder can rotate 90 left and right°. Therefore, it can also replace the UHZ or UHV holder when the drilling and grinding machine uses a flexible shaft. |
\\ |
\\\\ \\\Mechanical vise MS 4\Made of die-cast zinc with three machined sides. The rectangular hole is suitable for the adjustable baffle of MB140/S drill stand and bench drill TBM220. There are horizontal and vertical V-shaped notches in the jaws. The jaws are 50 mm wide and 10 mm high. The maximum clamping width is 34mm.
NO 28 132
![buy](https://img.alicdn.com/imgextra/i2/2044353934/TB2vG9BXVXXXXXPXpXXXXXXXXXX_!!2044353934.jpg) | \![Micro vise](https://img.alicdn.com/imgextra/i2/2044353934/TB2MJyAXVXXXXbuXpXXXXXXXXXX_!!2044353934.jpg) | |
\\\\ \\\ \Mini cross table KT 70\The MB 140/S cross table adopts precision feeding device and ball bearings, and adopts solid aluminum for precision surface treatment. Adjustable wedge-shaped slide rails to ensure a small gap. 3 MICROMOT standard T-slots (12 x 6 x 5mm). The adjustable ruler facilitates the positioning of the workpiece. The zero-adjustable handwheel is calibrated to move 1.0 mm per revolution, 1 division = 0.05mm. Including trapezoidal fixtures and fixing bolts installed on MB 140/S and TBM 220.
Other technical data:
Table size 200 x 70mm. X stroke 134mm; Y stroke 46mm, wide width 43mm. \ \NO 27 100
![buy](https://img.alicdn.com/imgextra/i2/2044353934/TB2vG9BXVXXXXXPXpXXXXXXXXXX_!!2044353934.jpg) | \\ | \\ | \\ | \![](https://img.alicdn.com/imgextra/i2/2044353934/TB2ecuAXVXXXXXkXpXXXXXXXXXX_!!2044353934.gif) | \\ Contains two trapezoidal fixtures. | \\![](https://img.alicdn.com/imgextra/i3/2044353934/TB2Ou1CXVXXXXbHXXXXXXXXXXXX_!!2044353934.gif) | \\ The table size is 200 x 70mm with 3 T-slots. | \\![](https://img.alicdn.com/imgextra/i2/2044353934/TB2f3WDXVXXXXXjXXXXXXXXXXXX_!!2044353934.gif) | \\ Adjusting handwheel with scale (1 circle = 1.0mm, 1 scale = 0.05mm). | \\![](https://img.alicdn.com/imgextra/i4/2044353934/TB2V4GAXVXXXXa.XpXXXXXXXXXX_!!2044353934.gif) | \\ The straight ruler can be moved to facilitate the positioning of the workpiece. | |