Original imported thread cup spindle buckle(Located in the adjusting knob and pressed on the copper washer), Suitable for many types of drums and drop wheels! Applicable to all OMOTO series, ABU(Abu)The whole series is basically applicable!
Dear, the black clasp is an imported part, which is thicker than the original one. The ABS material will be better and more durable! Direct use without any changes!
Many people think that this accessory is optional. In fact, none of the imported fishing reels is redundant!
Let me explain to you:
Such a small spindle buckle requires high precision.
Its function: 1. It is to prevent loosening; 2. It is to clamp the gap on the thread cup shaft to make the thread cup rotate but the central shaft cannot rotate. Especially during high-speed tossing, it can effectively improve the stability of tossing!
Imagine if the main shaft cleat can’t tighten the spool shaft, causing it to rotate in the center hole of the side cover,Will accelerate mechanical wear!Because there is no bearing in the center hole of the side cover,Will accelerateThe wear of the hole, the more it is worn, the bigger it is! Over time, the wheels will not be very smooth if the concentricity is not good.
![](https://img.alicdn.com/imgextra/i3/16767762/TB2.NtqGA9WBuNjSspeXXaz5VXa_!!16767762.jpg)
The cleats of the new spindle are relatively tight, as shown in the figure, you hear“Click” The voice is right!
![](https://img.alicdn.com/imgextra/i1/16767762/TB2f9Eyai6guuRjy1XdXXaAwpXa_!!16767762.jpg)
When installing, the plane is downward and the convex surface is upward!
![](https://img.alicdn.com/imgextra/i1/16767762/TB2AIDMaVXXXXbFXpXXXXXXXXXX-16767762.jpg)
Need adjustment knob and copper washer, please click the link below
Adjustment button: http://item.taobao.com/item.htm?spm=a1z10.5.w4002-294358350.81.FOjiHg&id=41924324737
![](https://img.alicdn.com/imgextra/i3/16767762/TB2w2HEaVXXXXaOXpXXXXXXXXXX-16767762.jpg)
Copper Washer: http://item.taobao.com/item.htm?spm=a1z10.5.w4002-294358350.40.4VK0zL&id=41863139395
The role of copper washer:Adjustment buttonOften make the adjustment tight and have inverseendWhen it is effective, it will not be pushed through by the central axis!
![](https://img.alicdn.com/imgextra/i1/16767762/TB2kG2xx4uTBuNkHFNRXXc9qpXa_!!16767762.jpg)