Support features | S5560- 30S-EI | S5560- 54S-EI | S5560- 30C-EI | S5560- 54C-EI | S5560- 30C-PWR-EI | S5560- 54C-PWR-EI | S5560- 54QS-EI |
Exchange capacity | 588Gbps |
Packet forwarding rate | 216Mpps | 252Mpps | 216Mpps | 252Mpps | 216Mpps | 252Mpps | 252Mpps |
Dimensions(width× deep× high)(Unit: mm) | 440×260 ×43.6 | 440×260 ×43.6 | 440×360 ×43.6 | 440×360 ×43.6 | 440×460 ×43.6 | 440×460 ×43.6 | 440×260 ×43.6 |
weight | ≤ 5kg | ≤ 5kg | ≤ 5kg | ≤ 5kg | ≤ 10kg | ≤ 10kg | ≤ 5kg |
Front panel Service port description | 24 10/100 /1000Base-T adaptive Ethernet port 4 10 Gigabit SFP+ ports 2 40G QSFP+ ports | 48 10/100 /1000Base-T adaptive Ethernet port 4 10 Gigabit SFP+ ports 2 40G QSFP+ ports | 24 10/100 /1000Base-T adaptive Ethernet port 4 10 Gigabit SFP+ ports | 48 10/100 /1000Base-T adaptive Ethernet port 4 10 Gigabit SFP+ ports | 24 10/100 /1000Base-T adaptive Ethernet port(PoE+) 4 10 Gigabit SFP+ ports | 48 10/100 /1000Base-T adaptive Ethernet port(PoE+) 4 10 Gigabit SFP+ ports | 48 10/100 /1000Base-T adaptive Ethernet port 4 10 Gigabit SFP+ ports 2 40G QSFP+ ports |
Expansion slot | without | 1 piece | without |
Expansion board | without | 2-port 40GE QSFP+ interface card 2-port 10 Gigabit SFP+ interface card 2-port 10 Gigabit electrical interface board 8-port 10 Gigabit SFP+ interface card 8-port 10 Gigabit electrical interface board | without |
SDN/Openflow | Support OpenFlow 1.3 standard Support multiple controllers(EQUAL mode, active/standby mode) Support multi-table pipeline Support Group table Support Meter |
Port aggregation | Support GE port aggregation Support 10GE port aggregation Support 40G aggregation Support static aggregation Support dynamic aggregation Support cross-device aggregation Supports up to 128 aggregation groups, each group supports up to 8 GE |
Port characteristics | Support IEEE802.3x flow control(Full duplex) Support storm suppression based on port rate percentage Support PPS-based storm suppression Support bps-based storm suppression |
Jumbo Frame | Support the maximum frame length of 10000 |
MAC address table | Support black hole MAC address Support setting the maximum number of port MAC address learning |
VLAN | Support port-based VLAN Support MAC-based VLAN Protocol-based VLAN VLAN based on IP subnet Support QinQ, flexible QinQ Support VLAN Mapping Support Voice VLAN Support GVRP |
Layer 2 ring network protocol | Support STP/RSTP/MSTP Support SmartLink Support RRPP |
DHCP | DHCP Client DHCP Snooping DHCP Relay DHCP Server DHCP Snooping option82/DHCP Relay option82 |
IRF2 Smart Resilient Architecture | Support IRF2 smart elastic architecture Support distributed equipment management, distributed link aggregation, distributed flexible routing Support stacking through standard Ethernet interface and other methods Support local stacking and remote stacking |
IP routing | Support static routing Support RIPv1/v2, RIPng Support OSPFv1/v2, OSPFv3 Support BGP4, BGP4+ for IPv6 Support equal cost routing, policy routing Support VRRP/VRRPv3 |
IPv6 | Support ND(Neighbor Discovery) Support PMTU Support IPv6-Ping, IPv6-Tracert, IPv6-Telnet, IPv6-TFTP Support manual configuration of Tunnel Support 6to4 tunnel Support ISATAP tunnel Support IPv6 in IPv6 tunnel Support IPv4 in IPv6 tunnel Support GRE tunnel |
Multicast | Support IGMP Snooping v1/v2/v3, MLD Snooping v1/v2 Support PIM Snooping Support MLD Proxy Support multicast VLAN Support IGMP v1/v2/v3, MLD v1/v2 Support PIM-DM, PIM-SM, PIM-SSM Support MSDP, MSDP for IPv6 Support MBGP, MBGP for Ipv6 |
Mirror image | Support stream mirroring Support N:4 port mirroring Support local and remote port mirroring |
OAM | Support 802.1ag Support 802.3ah |
Support ACL\QoS | Support L2(Layer 2)~L4(Layer 4)Packet filtering function, providing flow classification based on source MAC address, destination MAC address, source IP (IPv4/IPv6) address, destination IP (IPv4/IPv6) address, TCP/UDP port number, and VLAN Support time period(Time Range)ACL Support two-way ACL policies in the inbound and outbound directions Support for issuing ACL based on VLAN Support to limit the rate of receiving and sending messages on the port, with a minimum granularity of 8Kbps Support message redirection Support 802.1p and DSCP priority remarking of packets Support CAR(Committed Access Rate)Function Each port supports 8 output queues, and the CPU port supports 48 queues Support flexible queue scheduling algorithm, can be set based on port and queue at the same time, support five modes of SP, WRR, WFQ, SP+WRR, WDRR Support WRED |
Safety features | Support user hierarchical management and password protection Support 802.1X authentication/centralized MAC address authentication Support Guest VLAN Support RADIUS authentication Support SSH 2.0 Support port isolation Support port security Support PORTAL certification Support EAD Support DHCP Snooping to prevent spoofing DHCP server Support dynamic ARP detection to prevent man-in-the-middle attacks and ARP denial of service Support BPDU guard, Root guard Support uRPF (Unicast Reverse Path Detection) to prevent IP source address spoofing and prevent viruses and attacks Support IP/Port/MAC binding function Supports plaintext and MD5 ciphertext authentication of OSPF and RIPv2 messages Support PKI(Public Key Infrastructure, Public Key Infrastructure) |
Management and maintenance | Support XModem/FTP/TFTP loading upgrade Support command line interface(CLI), Telnet, Console port for configuration Support SNMPv1/v2/v3, WEB network management Support RMON(Remote Monitoring)Alarms, events, historical records Support iMC Intelligent Management Center Support system log, hierarchical alarm, debugging information output Support NTP Support power alarm function, fan, temperature alarm Support Ping, Tracert Support VCT(Virtual Cable Test)Cable detection function Support DLDP(Device Link Detection Protocol)Unidirectional link detection protocol Support LLDP Support Loopback-detection port loopback detection |
green technology | Support EEE (802.3az) Port automatic power down function Port timing down function(Schedule job) |
Input voltage | AC: Rated voltage range: 100V~240V AC, 50/60Hz DC: Input rated voltage range -36V~-72V DC | 360W AC: 100V~240V, 50Hz~60Hz 720W AC: 100V~240V, 50Hz~60Hz 1110W AC: 115V~240V, 50Hz~60Hz | AC: Rated voltage range: 100V~240V A.C, 50/60Hz DC: Input rated voltage range -36V~-72V DC |
Power consumption(At full load) | 70W | 75W | 115W | 130W | 150W(No PoE) | 155W(No PoE) | 120W |
Working temperature | 0℃~45℃ |
Relative humidity of working environment(Non-condensing) | 5%~95% |