Product Name: Domestic Canon ET-65III
Model: ET-65III
Specification: bayonet
Applicable lens: Canon
Fit EF 100-300mm F4.5-5.6 USM
EF 100mm F/2 USM
EF 135mm F2.8 withSoftfocus
EF 85mm/F1.8 USM
feature:
The hood can be installed in reverse for easy carrying and storage
After installing the hood, it does not affect the installation of the UV lens and lens cover
effect:
Lens hoods are widely used for backlighting or side-lighting photography to avoid glare from entering the lens as much as possible. In addition, it can also prevent accidental damage to the lens, prevent fingers from accidentally touching the surface of the lens, and shield the lens from wind, sand, rain and snow to some extent.
The role of the hood:
1. In the backlight, side light or flash photography, it can prevent the entry of non-imaging light and avoid fog.
2. It can prevent the scattered light from entering the lens when taking photos with forward light and side light.
3. In lighting photography or night photography, it can prevent the surrounding interference light from entering the lens.
4. It can prevent accidental damage to the lens, and it can also prevent fingers from accidentally touching the surface of the lens. It can also shield the lens from wind, sand, rain and snow to some extent.
Lens hoods are widely used in backlight photography, generally speaking, to avoid glare. However, if the light source is close, glare may still occur. At this time, you can use your hand to block the hood on the side where the light source is located. Whether the glare is eliminated, you must observe it clearly in the viewfinder.
![](https://img.alicdn.com/imgextra/i4/1095506909/TB2TeZZipXXXXb0XXXXXXXXXXXX_!!1095506909.jpg)
![](https://img.alicdn.com/imgextra/i2/1095506909/TB2iDU6ipXXXXaIXXXXXXXXXXXX_!!1095506909.jpg)
![](https://img.alicdn.com/imgextra/i2/1095506909/TB2dZZRipXXXXXqXpXXXXXXXXXX_!!1095506909.jpg)
![](https://img.alicdn.com/imgextra/i2/1095506909/TB22q.EipXXXXbVXpXXXXXXXXXX_!!1095506909.jpg)