What you must know before buying silicone products
The basic raw materials for the production of silica gel are silica fume and methyl chloride
Silicone cured with peroxide is smelly
Silicone cured with platinum addition system is completely odorless
Precipitated silica is what turns white when stretched or folded
What does not change color when stretched or folded is fumed silica
Both pacifiers and medical grades use platinum-cured fumed adhesives
silicone3Big features:
1. High and low temperature resistance, use temperature-40~+280°C;
2. Non-toxic, it is currently harmless rubber;
3. Aging resistance, at room temperature30Annual performance remains unchanged.
Factory direct sales
This product is made of silicone. For the convenience of inventory, sometimes it is stacked with the same product for a long time. There is deformation, but it does not affect the operation and use. Parents, please mind carefully, thank you!
we start fromnine threeIt has been specializing in the production of silicone rubber products since 2000, and has never stopped and never changed.
Environmentally friendly and non-toxic, High and low temperature resistance, and durability are the main reasons why people favor silicone rubber.
10A few years ago, when developing cake molds abroad, precipitated silicone rubber was used and cured with peroxide.
10Over the years, the standards for kitchen utensils such as cake molds have been continuously upgraded and improved.
Now we are all using more expensive fumed silica and cured with platinum.
Each of our cake molds conforms to the LFGB standard and is of the same quality as the products exported to Europe and the United States.
30Years of experience in the production of silicone raw materials, cost-effective materials, strict and solid craftsmanship.
It can be said with confidence: the quality of our cake molds is the level currently on the market.
Precautions:
- Avoid direct heating with open flames.
- Avoid puncturing, cutting and scratching the surface of the mold with sharp objects.
- Boil in boiling water before first use3~5 minutes.
- If the batter does not fill all the mold cavities, add a small amount of water to the empty mold cavity to prevent the local temperature from being too high and heat aging due to empty baking, which reduces the service life of the mold. Note that the mold is placed in the middle of the oven,Keep a distance of more than 3cm from the four walls of the oven, to prevent high temperature damage to the mold.
- When cleaning, use a soft cotton cloth or sponge to wipe, and avoid using hard tools such as wire brushes, steel balls, and emery cloths to avoid damaging the mold surface. Washing with warm water is better.