【model】Ew-63II
【Replace】Original Canon EW-63II hood
Completely compatible with the original Canon EW-63II
[Product Material] It is made of environmentally friendly ABS, the bayonet design, the internal grinding surface, can be comparable to the original
Compatible lens]
EF 28mm f/1.8 USM
EF 28-105mm f/3.5-4.5 USM
EF 28-105mm f/3.5-4.5 II USM
[feature of product]
Mounting can be installed in reverse installation, easy to carry and collect
After installing the hood, you can also install UV mirrors and lens caps.
Blocking side interfering light source
Reduce flare and enhance photo color and saturation
Lotus design reduces the black corner situation
![]()
The hood is widely used in backlight photography, which is generally avoided. However, if the light source is close, it is still possible to make glare. At this time, the hood can be blocked by hand on one side where the light source is located. Whether the glare is eliminated, it is clear from the viewfinder.
Its role has the following points:
1. When photographing, lateral light or flash photography, it is possible to prevent the incoming image of light and avoid fog.
2. When photocporting in the smooth and lateral light, the surrounding scattered light can be avoided into the lens.
3. When photography or night photography, you can avoid the surrounding interference light into the lens.
4. Can prevent accidental damage to the lens, can also avoid fingers to touch the lens surface, and can partially cover the sand, rain and snow to some extent.
![]()
The hood is widely used in backlight photography, which is generally avoided. However, if the light source distance is close, it is still possible to show the glare phenomenon. At this time, it can block the hood on one side where the light source is located, and whether the glare is eliminated, it can be directly observed in the viewfinder. In addition to the optical quality of the lens itself, the hood is very obvious, and the picture without the hood is not ideal for color, sharpness and contrast, and the picture of the hood has a good performance in a few aspects. Small hood, the effect is very different.
There are many sizes of the hood, and the focus of the focal length of the lens should be selected.The shorter the focal length of the lens, the larger the perspective, the shorter the hood.If the shading cover of the standard lens is used on the wide -angle lens, it will inevitably produce the consequences that cannot be imaged around the picture.Conversely, the role of a hood should not be played.When using a zoom lens, it is best to use the gloss hood that can be spoiled
If there is a problem during the mailing process, please contact me in time, and our company will be responsible to the end!
Note: Please open the inspection on the spot after receiving the goods. If the transportation is damaged, please refuse to accept it. If you sign the collection as the boundary, if it is damaged after the signing, it is irresponsible. Thank you for your cooperation!