parameter
Material; aluminum alloy
Full length; 226 mm
Movement distance; 105 mm
Accuracy; 0.01 mm
Weight; 639 grams
Height; 47.5 mm
Width; 60 mm
Length of clamp seat; 60 mm
Precision screw structure
Precision machining and careful manual adjustment, while achieving 0.01mm accuracy, there is no gap when switching back and forth
Micrometer scale
0.01 mm per grid, equivalent to 1/5 of the diameter of the hair
Damping regulator
The factory has been adjusted, if you need to adjust by yourself, please do it under the guidance of technical customer service.
Attach a tripod
The full length has Akka Swiss standard card slot and 5 1/4 inch screw holes, which can be connected to various tripod heads
SWEBO two-way blue bar fine macro head
Accuracy of 0.01 mm reaches the micrometer level
The SWEBO LS001 micrometer micro-pitch head has an accuracy of 10 times that of the second generation of LS18, reaching 0.01 mm, which is equivalent to 1/5 of the diameter of a hair.
The adjustment range of the center of gravity of the 180mm plate, the precision fine adjustment of the stainless steel trapezoidal lead screw, the copper sliding part, and the double operation mode of the handwheel crank handle, which can not only shake quickly, but also accurately fine-tune, it has both rack-type speed and screw adjustment Accuracy. It can be used for macro stack shooting, macro precision focusing, etc.
Its core driving component is not an ordinary screw rod, but a stainless steel trapezoidal multi-head screw originally used for 3D printers.
The moving nut uses copper to take advantage of its self-lubricating performance. Supporting the rotating parts are 2 miniature thrust ball bearings and a copper graphite core miniature bearing sleeve.
Its operating parts use enlarged knurled knobs, and a knurled crank is designed for fast travel.