Lumintop zoom1 product details
* Use Cree XPL-HD LED
* Use 1 18650 rechargeable lithium ion battery, compatible with 2 cold-resistant CR123A lithium batteries
* 4 levels of brightness plus strobe and SOS mode, high brightness 850 lumens
*Adopt retractable lens to adjust the spotlight
* Micro USB rechargeable, built-in charging indicator function
* The electronic anti-reverse connection design prevents the flashlight from being damaged by the reverse battery connection
* One-button control of neck switch, convenient and quick
* Locking function prevents inconvenience caused by accidental triggering of the flashlight
* Made of alloy, the surface is hard oxidized, wear-resistant and anti-drop treatment
* IP65 protection, can resist water splashing from all sides
* Size:136*40mm, net weight: 130g(Without battery)
* 5-year warranty, limited warranty
* Packing list: 1* flashlight, 1* hand strap, 1* charging cable, 1* manual, 2* spare O-ring, *warranty card
Micro USBCharging and charging instructions
Open the USB dust cover, insert the Micro USB charging port, and plug in the power source to charge the flashlight. The maximum charging current is 2A during charging, and a 5V/2A adapter is recommended.
When charging, the indicator light inside the button is red, and blue when fully charged. In normal standby mode, the indicator light is green
Switch operation instructions
- Power on/off: click the neck switch to turn on, press and hold for 1 second to turn off
- Dimming and shifting: In the power-on state, click the switch, press the low-medium-high light cycle, and the gear position has memory.
- Extremely bright mode: In the power-on state, quickly double-click the switch to enter the extremely bright position, and click the switch to return to the previous brightness position.
- Flash/SOS: In the shutdown state, press and hold the switch for 3 seconds to enter the flash, click the switch to switch SOS, and press the switch for 1 second to shut down.
- Lock/Unlock: In the shutdown state, press and hold the switch for 5 seconds to enter lock/unlock
Intelligent memory function
In the normal gear mode, the flashlight will memorize the brightness gear when it is turned off, and restart with the memorized brightness gear when it is turned on next time.(Except for extremely bright, flashing, and SOS)
Electronic anti-reverse function
In order to prevent the reverse connection of the battery when using a lithium ion battery without a protection circuit, which will cause a short circuit and damage the flashlight, the flashlight is equipped with an electronic anti-reverse protection function. At the same time, we recommend using a reputable pointed lithium-ion battery with a protection circuit
Electronic lock function
Lock: In the shutdown state, press and hold the switch for 5 seconds, the flashlight will change from burst flashing to slow flashing, which means the flashlight has entered the locked mode. Click the switch when locked, it can only light up the low light level momentarily, and it will go off when you release it.
Unlock: Press and hold the switch for 5 seconds to unlock it and boot with the memory brightness level. Or you can unlock the flashlight by loosening the tail of the flashlight
Overheating protection
When the flashlight is working for a long time in the bright position, it will gather a lot of heat. In order not to affect the comfort of the flashlight and protect the internal core components from damage, the flashlight has a temperature control downshift protection setting. If you need to turn on the bright file again, you can set it manually
Tips:
1. Lithium-ion batteries are industrial batteries, please use reputable pointed 18650 lithium-ion batteries with protection circuits;
2. When using CR123A lithium battery, charging is prohibited to prevent explosion and other dangers.
*When using CR123A lithium battery, it is prohibited to charge the flashlight.
Warning
1)Do not expose the lamp to human eyes directly to avoid damage to eyesight.
2)If the lamp is not suitable for a long time, please remove the battery to prevent battery leakage and damage the lamp.
3)In order to prevent the trouble of accidentally lighting the flashlight by pressing the switch by mistake, you can set the flashlight to lock mode when not in use, or loosen the screw of the tail cover to cut off the power.