Warranty range Warm reminder: Weida is the national general agent of the British Rega Gentleman, and the National Bank’s genuine products are accompanied by a red warranty card. Weida will enjoy the National Bank’s genuine warranty policy, after-sales and service. If you buy the National Bank, you need to understand and look for it...
![](https://img.alicdn.com/imgextra/i3/886990948/O1CN01pNI7nY1IsE4yFwNdw_!!886990948.jpg)
![](https://img.alicdn.com/imgextra/i4/886990948/O1CN010UppTT1IsE6uClJHU_!!886990948.jpg)
![](https://img.alicdn.com/imgextra/i1/886990948/O1CN01Nfoufu1IsE6wYJnTK_!!886990948.jpg)
![](https://img.alicdn.com/imgextra/i1/886990948/O1CN01n5jUHb1IsE6y8eD7k_!!886990948.jpg)
![](https://img.alicdn.com/imgextra/i1/886990948/O1CN01nuLam71IsE6l5LSYZ_!!886990948.jpg)
![](https://img.alicdn.com/imgextra/i2/886990948/O1CN01jdFwGw1IsE6uCiIAq_!!886990948.jpg)
![](https://img.alicdn.com/imgextra/i1/886990948/O1CN017cqIwu1IsE6xUQQxE_!!886990948.jpg)
Rega elex-r gentleman Alice R HIFI music amplifier
Design innovation
The elex-r is built with high standards and design to provide the best audio performance, while the rest is simple to use and easy to install. The full width of elex-r is built to increase heat dissipation, along with a larger transformer, so that elex-r provides 90 watts per channel 6 and 72.5 watts/Ω channels are divided into 8 design center levels
Our time, energy and money are spent on development; circuits and construction make use of the highest specifications of components throughout. Since we have included useful functions such as the design part of the preamplifier output, so that the new elex-r amplifier can be used in a wide range of combination systems and avoid redundant appliances such as tone control or headphone sockets that can block the signal path and degradation The quality of the sound produced.
The elex-r has been built with high reliability and quality standards to ensure years of music enjoyment. The main function of an amplifier is to promote and equalize the low-level signal generated by the cartridge of the phono, DAC and CD player or other source components that can drive the speakers. This amplifier achieves this reduction and distortion is very important because it will directly affect the music. The distortion level is usually 0.007%; on the output card.
The design of the elex-r volume control and preamplifier overcomes the problems associated with the standard arrangement. This design uses a custom chip and peripheral support circuits like a microcontroller and a custom rotary volume control.
The elex-r uses a combination of feedback and passive volume control, where the feedback and input level changes to set the desired volume. The level and tracking are set between the two channels with tight tolerance parts in the preamplifier circuit and fewer actual potentiometers themselves, thereby keeping the channel mismatch due to the volume control tracking not to a minimum. As well as tracking less than the minimum, this method also reduces noise and input overload control to only use the required gain to amplify the signal. This form of volume control is usually only required for low-noise control at the level of accuracy in professional broadcast environments.
Power amplifier technology
For elex-r output amplifiers, elicit-r and brio-r were born after extensive research by our engineers and developed a low source impedance emitter follower driver stage. This is based on a 150W Sanken Darlington output complementary transistor. The technology and acoustic improvement obtained by using low-impedance drivers are well known, however, it can have a high-current driver stage using standard transistor structures. Combine the Darlington transistor with a low impedance driver(Operating with embedded thermal bias network at a lower stable current)Combined to form a complementary emitter follower to simulate Class A conditions with low reputation and good thermal stability.
Key feature
Fully customizable full width case with improved heat dissipation
Combined feedback & passive volume control preamplifier
90 watts per channel 6 ohms / 72 watts for 8 ohms
High-spec integrated phono amplifier
New multilingual user manual
To improve the power drive level
Mixed brio-r and elicit-r design
Dedicated mini remote control phone includes
Preamplifier / recording / 4 line input
New custom transformer
specification
power supply
Voltage: 230V & 0
Frequency: 60 or 60 Hz
Power consumption: 250 watts
230V fuse: t3.15al 20mm
115V fuse: t5al 20mm
Output Power
72.5w 8Ω two-channel drive design center, etc.
6Ω90W two-channel drive REGA speaker impedance evaluation
113w 4Ω dual channel driver
Audio input
Sensitivity(72.5w 8Ω1.7mv(Parallel 220pF load 47k
Maximum input level: 100mV
Line input
Sensitivity(72.5w 8Ω164mv(Load 30-50k
Maximum input level: 10V
Tape output
Level: Rated input 164mv
Output impedance: 470
Line out
Level: rated input 625mV
Output impedance: 600