H3C WA5530 Indoor 802.11ac wireless access equipment
The H3C WA5530 series of wireless products are a new generation of high-end products for eight-stream services independently developed by Hangzhou Huasan Communication Technology Co., Ltd. (H3C). It adopts a three-band 802.11AC design and a dual-band 802.11ac Wave2 design that can be widely used in high-density user access. And electronic schoolbags and other scenes.
The WA5530 series currently has a WA5530 product, all with built-in antenna arrays, supporting access to three frequency bands, compact and beautiful appearance, flexible installation methods, suitable for wall-mounted, ceiling-mounted and other installation methods.
Industry-leading three radio frequency innovative design
The traditional wireless access AP usually adopts a dual-frequency scheme, which provides wireless signal access in two frequency bands of 2.4GHz and 5GHz respectively. The H3C WA5530 product innovatively adopts a three-band design, while retaining the original dual radio frequency, it adds a four-stream 802.11ac wave2 radio frequency. With the continuous development of technology, 5G 802.11ac Wave2 terminals have gradually become the mainstream, and the 2.4G frequency band of APs has gradually become compatible with low-end terminals. After the WA5530 adds a third RF module, the access rate of the WA5530 is as high as possible. 3Gbps, very suitable for use in e-schoolbag scenarios and high-density access scenarios.
Realize the simultaneous communication of multiple terminals and break through the disadvantages of traditional wireless competition
H3C WA5530 series AP supports MU-MIMO technology. MU-MIMO is an important feature of 802.11ac Wave 2. Through MU-MIMO technology, the AP can send data to multiple terminals at the same time, that is, WA5530 can send data information to multiple terminals at the same time According to the number of terminal streams, the perfect combination of three-frequency design and MU-MIMO of the whole machine, WA5530 whole machine can send wireless messages to 6 terminals at the same time, breaking through the traditional wireless network serial communication mechanism, and wireless spectrum resource utilization The rate has increased exponentially, the number of effective access users has been greatly increased, the deployment overhead of the wireless network is effectively reduced, and the user experience in the case of high-density users is improved.
Realize smart dual gigabit cloud access and high-quality wireless network TCO
WA5530 series APs comply with the 802.11ac protocol standard and can provide access to 3 different frequency bands, achieving a wireless transmission rate of 1733Mbps + 867 Mbps + 400 Mbps and a high 2 Gigabit wired access capability, which is about 5 times that of 802.11n products in the same environment . With built-in antenna coverage technology, it can effectively provide higher-performance mobile cloud access services in terms of coverage, access density, and stable operation, and assist users in achieving high-quality wireless network TCO (Total Cost of Ownership) .
Green and low-carbon design
WA5530 series AP adopts professional green and low-carbon design, supports dynamic MIMO power saving mode (DMPS) and enhanced automatic power saving transmission (E-APSD), intelligently identifies the actual performance requirements of the terminal, rationally allocates the terminal sleep queue, and dynamically adjusts the MIMO working mode .
WA5530 series AP supports Green AP mode, which realizes single antenna standby and more accurate energy saving.
The WA5530 series AP adopts innovative packet-by-packet power control (PPC) technology to dynamically adjust the direct two-way power of the AP device and the client under the premise of ensuring that the message can be successfully transmitted, so as to reduce the energy consumption of the device and extend the standby time of the mobile terminal The role of.
Support Fat/Fit two modes
WA5530 series AP supports Fat and Fit two working modes. According to the needs of network planning, it can flexibly switch between Fat and Fit working modes. At the same time, users can flexibly choose the required device factory version (Fat mode) according to application requirements. Version or Fit mode version).
When the initial scale of the customer''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s wireless network is small, the customer only needs to purchase the corresponding wireless equipment and set its working mode to Fat mode. With the continuous expansion of the customer''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s network scale, when the number of wireless devices used in the network reaches dozens or even hundreds, in order to reduce the complexity of network management, it is recommended that customers purchase the WX series wireless controller devices independently developed by H3C for centralized management. For all WA5530 series wireless devices in the network, you only need to switch their working mode to Fit mode at this time.
The work mode switching process only requires simple command lines and can be executed in batches through the device network management, which is conducive to smoothly upgrading the customer''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s wireless network from a small network to a large network, thus better protecting the user''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s investment, which is very suitable for carrier-level large-scale wireless Smooth expansion and upgrade of the network.
Provide local forwarding function
When the WA5530 series AP (Fit mode) is forwarded through the WAN, the wireless access device is deployed in the branch and the wireless controller is deployed in the headquarters. All user data is sent by the wireless access device to the wireless controller, and then the wireless controller Perform centralized forwarding. WA5530 series APs can directly convert data messages into wired format messages on wireless access devices, so that data messages do not pass through the wireless controller but are forwarded locally, which greatly saves wired bandwidth.
Support IPv4/IPv6 dual protocol stack (Native IPv6)
WA5530 series APs fully support IPv6 features, and the device implements IPv4/IPv6 dual protocol stacks. Regardless of whether the original wired network is IPv4 or IPv6, it can automatically register with the WX series controller to provide WLAN services, and it will not become an information island in the network.
Support RealTime Spectrum Guard (real-time spectrum protection) mode
RealTime Spectrum Guard (RTSG) is an innovative professional monitoring solution for wireless environment spectrum status proposed by H3C. H3C WA5530 series AP supports a built-in RF acquisition module to achieve deep integrated RF monitoring and real-time spectrum protection.
The RTSG console is integrated and deployed in the H3C iMC Intelligent Management Center. It manages the tunnel through CAPWAP, communicates with the Sensor AP and collects data, to achieve 7X24 hours of wireless environment quality monitoring, wireless network capability trend assessment, and unlicensed interference alarms. Through graphical methods, actively detect and identify all 2.4GHz/5GHz radio frequency interference sources (Wi-Fi or non-Wi-Fi), and can provide real-time FFT graphs, spectral density graphs, spectrum graphs, duty cycle graphs, and event spectra Map, channel power, interference power, etc.; it can automatically identify the source of interference, determine the location of the wireless device in question, and ensure that the wireless network performs better. Combined with the H3C iAR intelligent report component, it can realize the storage, traceability, and playback of radio frequency quality history records in the entire coverage area, and automatically generate customized trend, compliance and audit reports.
In response to the different levels of users'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' wireless environment supervision requirements, the deployment of the RTSG solution can flexibly adopt Local mode or Monitor Mode. When working in Local Mode, it can maintain normal user access and data packet forwarding under the premise of effective spectrum protection.
Provide EAD wireless access
The End user Admission Domination (EAD) solution starts from the perspective of controlling the secure access of user terminals to the network, integrates network access control and terminal security products, and enforces corporate security policies for user terminals that access the network. Linked with the security policy server, it can be used to offline, isolate, remind, or monitor unqualified wireless clients that are infected with viruses or have system vulnerabilities, etc., and only the wireless clients are allowed after they comply with the corresponding security policies. Access the network normally, thereby improving the overall security of the wireless network.
Support remote probe analysis
The WA5530 series AP supports the sensor device used as a remote probe analysis, which can listen and capture Wi-Fi packets in the coverage area and mirror it to the local analysis device in real time for network administrators to troubleshoot and optimize analysis. The remote probe analysis function can not only perform non-convergence mirroring for the working channel, but also poll and sample all channels to flexibly meet the requirements of wireless network monitoring, operation and maintenance.
Built-in radio frequency optimization engine (ROE)
The WA5530 series AP has a built-in RF Optimizing Engine. Through feature and protocol-based RF optimization, it effectively improves application acceleration and quality assurance effects in scenarios such as high-density access and streaming media transmission in wireless deployment. These include: multi-user fair scheduling, mixed access fairness, interference filtering, rate optimization, spectrum navigation, multicast enhancement (IPv4/IPv6), packet-by-packet power control, and intelligent bandwidth guarantee, etc.
Support intelligent load balancing
The WA5530 series AP supports a complex balancing method based on the number of connected users and traffic. When the wireless controller finds that the load of the wireless access device exceeds the set threshold, the wireless controller will automatically calculate this user for the newly connected user Is there a wireless access device with lighter load around for users to access? If there is, the user’s association request will be rejected, and the user will switch to other wireless access devices with lighter load, but if the wireless users are not overlapping In the coverage area, traditional load balancing methods often lead to failure to connect to the network and cause misbalances. H3C innovatively supports intelligent load balancing technology to ensure that the load balancing function is activated only for wireless users in overlapping coverage areas, effectively avoiding the occurrence of misbalances, thereby greatly increasing the wireless network capacity.
Support Chinese SSID
WA5530 series AP supports the use of Chinese SSID, which can specify a SSID containing 16 Chinese characters, or a mixed SSID of Chinese and English, which provides greater convenience for domestic users.
Fully support intelligent wired and wireless integrated management
All H3C wireless products can realize integrated wired and wireless management based on WSM through an open network management protocol.
WSM is a wireless operation management component developed by H3C on the basis of the next-generation business software platform iMC (Intelligence Management Center/Intelligent Management Center). It not only provides administrators with flexible component selection, but also conforms to the mainstream SOA architecture in the industry. The scalability can meet the evolving needs of customers'''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' network management. The Web-based management system provides a simple and friendly management platform for wireless business managers. Cooperating with the iMC intelligent management platform and other components, it can also realize wireless device panel management, fault management, performance monitoring, software version management, configuration file management, access user management and other functions, and can unify other devices in the network Management, truly realize intelligent wired and wireless integrated management.
Hardware specifications
Attribute | WA5530 |
Weight | 0.6Kg |
Dimensions (not including antenna interface and accessories) | 54mm x 180mm X 180mm |
1000M Ethernet port | 2 pcs |
PoE | Support 802.3at compatible power supply, and support dual Ethernet ports at the same time POE power supply |
Local power supply | Support 54V DC |
Console port | 1 piece |
Built-in antenna | Built-in antenna system (working frequency band: 2.4G and 5G, high gain of the whole machine can reach 7dBi) |
Built-in Bluetooth | Support |
Working frequency | 802.11ac/n/a: 5.725GHz-5.850GHz; 5.15~5.35GHz (China) 802.11b/g/n: 2.4GHz-2.483GHz (China) |
Modulation technology | OFDM: BPSK@6/9Mbps, QPSK@12/18Mbps, 16-QAM@24Mbps, 64-QAM@48/54Mbps DSSS: DBPSK@1Mbps, DQPSK@2Mbps, CCK@5.5/11Mbps MIMO-OFDM(11n): MCS 0-15 MIMO-OFDM(11ac): MCS 0-9 |
Modulation method | 11b: DSS: CCK@5.5/11Mbps, DQPSK@2Mbps, DBPSK@1Mbps 11a/g: OFDM:64QAM@48/54Mbps,16QAM@24Mbps,QPSK@12/18Mbps,BPSK@6/9Mbps 11n: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM 11ac: MIMO-OFDM: BPSK, QPSK, 16QAM, 64QAM, 256QAM |
Transmit power (single channel large) | 20dBm |
Adjustable power granularity | 1dBm |
Reset/restore factory configuration | Support |
Status Indicator | Blink alternate blinking mode, orange, green and blue blinking mode in different working states, terminal access breathing blinking mode |
Working temperature/storage temperature | 0ºC~45ºC/-40ºC~70ºC |
Working humidity/storage humidity | 5%~95% (non-condensing) |
Protection level | IP41 |
Anti-theft lock | Support |
Whole machine power consumption | <25W |
safety regulations | GB4943, EN60601-1-2 (medical), UL/CSA 60950-1, EN/IEC 60950-1, EN/IEC 60950-22 |
EMC | GB9254, EN301 489, EN55022, FCC Part 15, RSS-210 |
RF certification | FCC Part 15, EN 300 328, EN 301 893, Model Approval of Radio Transmission Equipment by the Ministry of Industry and Information Technology |
Health | FCC Bulletin OET-65C, EN 50385, IC Safety Code 6 |
MTBF | >250000H |
statement:Because the manufacturer will change the product packaging, origin or some accessories without any advance notice, the company cannot ensure that the goods received by the customer are completely consistent with the store pictures, origin, and accessories. It can only be guaranteed to be the original factory! And to ensure that it is consistent with the same mainstream new products on the market at that time. If this shop is not updated in time, please forgive me!
Attention buyers who require invoicing: The invoice and the goods will be sent together for non-special circumstances,The invoice is placed in the corresponding express bag, Please pay attention to checking and receiving the goods! If not, contact the customer service staff in time on the same day. If the invoice is lost due to the buyer''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s inspection, we will not be responsible for it! beg to be excused!
>Buyers must read
Delivery Method
one.Home mention
Matters needing attention:
1.Self mention time: Monday to Friday,09:00-18:00(In case of national statutory holidays, the holiday time published by this franchise store shall prevail. Please pay attention to it then)
2.Self mention location:Room 215, Unit 5, Upper Floor, Yipin, No. 9 West Santiao, Anningzhuang, Haidian District, Beijing
3. Contact person for mentioning: Mr. Liu Miss Xiao
4.Contact phone number:010-82437408 15010428840 13241275194
5.Before you come, please make an appointment with the customer service in advance,And specify the specific model and price.
two· payment method
1. For customers who come to pick up,Pay with Alipay,Cash is also accepted/Cheque/Three payment methods for card transfer
2. Choose the check payment method, the customer needs to fill in the check content completely by himself(Payment in5000Yuan or5000More than RMB, the goods can be picked up after the payment is in the account); Do not accept checks with passwords.
Three· express shipping
1. The express delivery sent by this shop is delivered according to the express company selected by the customer service staff and the customer at the time. If no express delivery is discussed, the delivery will be delivered by the monthly settlement express company that can reach the customer and signed by the company by default.(As a monthly settlement customer, the safety of the goods is guaranteed). If there is any change, please inform the customer service staff by Wangwang or phone before 6:00 pm. After 6:00 pm or the goods have been sent out, they cannot be changed.
2. Delivery time: goods photographed and paid on the same day at 6 pm every day:00Ship before point. If the goods are photographed and paid in the evening, the goods will be sent out in the morning or afternoon of the next day, and it may be postponed on holidays.
Four. After-sales service
1.All products sold in our shop will be returned, exchanged and repaired in case of quality problems, and strictly in accordance with the three guarantees of relevant national products(7Refundable, exchangeable and repairable within days;8-15Exchangeable and repairable within days(Our shop is extended for one month)). The service time for return, exchange and repair shall be counted from the date of receipt of the goods. The return and exchange service does not include the following situations: man-made damage, damage caused by improper use, damage caused by force majeure(Earthquake, fire, etc.)And the product was disassembled.
2. Freight issues arising from returns, exchanges and repairs:
1)Within seven days after the receipt of the goods, if there is a quality problem with the goods themselves, the shipping costs for the return and exchange shall be borne by the seller; within the warranty period seven days after the receipt of the receipt, due to the quality problems of the goods themselves, the buyer and the seller shall bear their own shipping costs. freight;
2)If it’s not the quality of the goods, it’s just that the customer didn’t read the instructions carefully(Or do not consult our shop in detail), And cause the goods to be unsuccessfully used, and the freight caused by the misjudgment of return shall be borne by the buyer.
3.Judgment of product quality
If the product has quality problems, please go to the manufacturer''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s after-sales service center for testing and issue a test report(If the after-sales service center of some manufacturers cannot provide the test report, a maintenance inspection document is required)If the test report confirms that it is a quality problem, then return the test report, the defective product and the complete packaging accessories to our company for return and exchange procedures. If it is damaged or lost, we will not be able to handle it for you.
4.Special note,No refunds and exchanges will be processed under the following circumstances:
1)Any products not sold in our shop(Serial number does not match);
2)For out-of-warranty goods(Goods beyond the warranty period of three guarantees)The warranty will not be accepted;
3)Product quality problems caused by unauthorized repairs, misuse, collision, negligence, abuse, liquid intake, accidents, alterations, incorrect installation, or tearing up or altering labels, machine serial numbers, anti-counterfeiting marks, and non-return and exchange services Within range
4)The product''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s outer packaging, attachments, manuals are incomplete, the invoice is missing or altered, and no return or exchange service will be provided;
5)Non-commodity quality issues, such as compatibility issues, dissatisfaction with color, appearance, shape, etc., are not quality issues and are not within the scope of return and exchange services;
6)The normal wear and tear of the goods is not within the scope of the return and exchange service;
7)Digital,ITThe faults that can be eliminated through the software upgrade of such commodities are not within the scope of the three guarantees, as long as they are sent to the local manufacturer''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s designated or special after-sales service center for upgrade.
8)Open the original packaging of the sealed product(Such as a one-time seal or tape seal is opened);
9)The product has been used.
Invoice system description
1.How to get an invoice
(1)This shop guarantees that the goods sold are all authentic and licensed, and the shipment does not contain any documents by default.
(2)Invoices are available for most products,But the goods taken by default do not come with any type of invoice, Please know.If the buyer needs an invoice"Any 11% tax of the equipment amount will be added.",Please explain and make up the corresponding tax in advance, and leave a message about the invoicing in Want Want or in the order(Information such as the name of the payer''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''s unit and tax number).
(3)The invoice does not include the freight amount.
2.Set up invoice information
invoice type(General VAT invoices, special VAT invoices),Invoice(personal company),invoice content(Details, network equipment), The contents of the invoice header Cannot be empty, you can choose personal or company name.
3.Notes on invoicing
(1)To provide13% VAT special issueticket(Need to add11%Tax), Please explain in advance before purchasing, and provide billing information(Including: the full name of the company/Tax number/Address and telephone/Account bank and account number). Can be used as a unit deduction.